image

C-Type Demagnetizer

Efficient. Reliable. Continuous.

C-Type Demagnetizer

Application

A compact and efficient demagnetizing solution designed to eliminate residual magnetism from workpieces generated during manufacturing processes such as turning, milling, grinding and contact with magnets.

Special Feature

The C Type Demagnetizer is specially designed for on-line conveyor systems, allowing workpieces to pass through the demagnetizing tunnel for continuous processing. The system can be operated using a foot switch and can also be integrated with a Programmable Logic Control (PLC) panel for automated operation.

Key Characteristics

  • Designed to eliminate residual magnetism from workpieces.
  • Suitable for residual magnetism generated during turning, milling and grinding operations.
  • Helps remove magnetism caused by contact with magnets during manufacturing processes.
  • Residual magnetism can be verified using a Gauss Meter.
  • The C-Type model is particularly designed for on-line conveyor systems.

How It Operates

  • Provide a suitable electrical supply to the demagnetizer.
  • Operate the demagnetizer using the foot switch.
  • The unit can also be operated through a Programmable Logic Control panel (PLC).
  • Pass the workpiece through the demagnetizing tunnel.
  • The workpiece is demagnetized as it passes through the tunnel.

Performance Checking

The effectiveness of demagnetizing can be verified by measuring the residual magnetism of the workpiece before and after the demagnetizing process using a Residual Field Meter (Gauss Meter).

Before Check Demagnetize After Check Gauss Meter Residual Field
Performance Verification

Check residual magnetism before and after

The result is verified by measuring the workpiece before and after it passes through the C-type demagnetizing tunnel.

Gaussmeter
verification

Use a Residual Field Meter (Gauss Meter) for both readings and confirm the required result before the workpiece continues to the next manufacturing process.

Performance Check Procedure

  1. Measure residual magnetism with a Gauss Meter before demagnetizing.
  2. Provide a suitable electrical supply to the C-type demagnetizer.
  3. Start the unit with the foot switch or PLC control panel.
  4. Pass the workpiece through the tunnel on the online conveyor system.
  5. Measure residual magnetism again after demagnetizing.
  6. Verify that the required demagnetizing result has been achieved.

Operation Sequence (Follow the steps)

01

Provide a suitable electrical supply to the C-Type Demagnetizer.

02

Measure the residual magnetism of the workpiece using a Gauss Meter before demagnetizing.

03

Operate the demagnetizer using the foot switch or through the Programmable Logic Control (PLC) panel.

04

Pass the workpiece through the C-type demagnetizing tunnel for residual magnetism removal.

05

Allow the workpiece to undergo the demagnetizing process as it passes through the tunnel.

06

Measure the residual magnetism again with a Gauss Meter after demagnetizing to verify the result.

Available Models

C-Type Demagnetizer Model

Available models with different aperture sizes to suit various demagnetizing applications.

Model Code No. Aperture Size (L × W × H)
023-05-01 150 × 100 × 100 mm

Effective Demagnetizing Solutions

Electrical control panel for the C-type demagnetizer
Control Panel for Demagnetizer

The C-Type Demagnetizer is particularly designed for online conveyor systems.

WhatsApp
Call Us