image

Tunnel Type Demagnetiser with Belt Conveyor System

Remove Residual Magnetism

Tunnel Type Demagnetiser with Belt Conveyor System

Application

An industrial demagnetizing system designed to eliminate residual magnetism from workpieces generated during manufacturing processes such as turning, milling and grinding operations.

Operation

The system combines a demagnetizing tunnel with a belt conveyor, allowing workpieces to pass continuously through the demagnetizing zone. PLC-based control provides convenient operation, while the residual magnetic field can be checked before and after demagnetizing using a residual field meter (Gauss meter).

Key Characteristics

  • Designed to eliminate residual magnetism generated during manufacturing processes such as turning, milling and grinding operations.
  • Suitable for workpieces that may become magnetized through contact with magnets during manufacturing.
  • Workpieces are passed continuously through the tunnel using a belt conveyor system.
  • Residual magnetism can be verified using a residual field meter (Gauss meter).

How It Operates

  • Provide a suitable electrical supply to the demagnetizer.
  • The system is operated through a Programmable Logic Control (PLC) panel.
  • Place the workpiece on the belt conveyor and pass it through the demagnetizing tunnel from start to end.
  • After demagnetizing, check the residual magnetism of the workpiece using a residual field meter (Gauss meter).

Applications & Advantages

The tunnel demagnetizer is suitable for continuous industrial demagnetizing applications and can help improve tool life, productivity and overall quality.

Production Department Packing Department Tool Room Standard Room Press Shop Assembly Line
Performance Verification

Reliable demagnetizing performance

The demagnetizing performance of the system can be verified by checking the residual magnetism of the workpiece before and after the demagnetizing process using a residual field meter (Gauss meter). This helps confirm that the required reduction in residual magnetism has been achieved.

Gauss residual field
measurement

Provide a suitable electrical supply to the demagnetizer and operate the system through the Programmable Logic Control (PLC) panel as specified for the equipment.

Operating Procedure

  1. Provide a suitable electrical supply to the demagnetizer.
  2. Operate the demagnetizer through the Programmable Logic Control (PLC) panel.
  3. Check the residual magnetism of the workpiece using a residual field meter (Gauss meter) before demagnetizing.
  4. Place or pass the workpiece through the demagnetizing tunnel using the belt conveyor system.
  5. Allow the workpiece to pass through the tunnel from start to end as part of the demagnetizing process.
  6. After demagnetizing, check the residual magnetism again using the residual field meter (Gauss meter).

Operation Sequence (Follow the steps)

01

Provide a suitable electrical supply to the tunnel type demagnetizer before starting operation.

02

Operate the demagnetizer through the Programmable Logic Control (PLC) panel.

03

Check the residual magnetism of the workpiece using a residual field meter (Gauss meter) before demagnetizing.

04

Place the workpiece on the belt conveyor and pass it through the demagnetizing tunnel from start to end.

05

Allow the workpiece to pass completely through the tunnel so that the residual magnetism is reduced.

06

Check the residual magnetism again using the residual field meter (Gauss meter) after demagnetizing.

Available Sizes

The tunnel demagnetizer is available in different overall sizes to suit production and material handling requirements.

Model Code No. Overall Size (L × W × H)
023-07-01 L1500 × W450 × H1500 mm
023-07-02 L2000 × W600 × H1500 mm

Effective Demagnetizing Solutions

Continuous belt conveyor demagnetising system
Continuous Conveyor Demagnetizing
Industrial components passing through a tunnel demagnetiser
Industrial Component Demagnetizing
Metal parts on the demagnetising conveyor
Metal Parts Demagnetizing
Automated belt conveyor demagnetising application
Automated Belt Conveyor Demagnetizing

Suitable for production departments, packing departments, tool rooms, standard rooms, press shops and assembly lines.

Need help choosing a model?

Share your conveyor and workpiece details with our team.

WhatsApp
Call Us