Magnetic Base for CMM Round Shape

Magnetic Base for CMM Round Shape

Tool Room Equipment

Magnetic Base for CMM Round Shape

The Magnetic Base for CMM Round Shape securely mounts a CMM arm to a ferrous workpiece and holds it in a rigid, stable position during measurement.

Its permanent magnetic circuit is operated by an ON/OFF lever. A round upper plate provides the mounting surface for the CMM arm, while a safety lock helps prevent accidental release.

Holding Force 500 kg rated holding force
ON/OFF Control Lever-operated permanent magnetic circuit
Nominal Size 160 × 115 × 135 mm
Round Top Plate Designed for mounting a CMM arm

Application: Rigid mounting of a CMM arm on a magnetic workpiece.

Product Information

Magnetic Base for CMM Round Shape

Permanent magnetic mounting solution for portable CMM arms.

Application

This permanent magnetic base is used to mount and hold a CMM arm rigidly on a ferrous workpiece during inspection and measurement.

Characteristics

  • Permanent magnetic base with powerful NdFeB-grade magnets
  • Magnetic field controlled by an ON/OFF lever
  • Turning the lever clockwise through 180° energizes the base; turning it anticlockwise de-energizes it
  • V-shaped bottom helps prevent rocking on uneven contact areas
  • Round upper plate supports CMM arm mounting with suitable tapping
  • Safety lock prevents unintended release of the arm

Spares

  • Magnetic assembly
  • Handle and safety-lock assembly
  • Stoppers and hook
  • Other replacement parts available to support long-term service
Performance & Safety

Correct Contact Ensures Reliable Holding

For line contact with the workpiece, consider only 40% of the rated lifting force. To achieve full recommended capacity, keep the magnetic face and workpiece clean and ensure close, balanced contact.

500 kg rated holding
force

Each base is pull-tested on a Universal Testing Machine and supplied with a test certificate.

Precautions

  1. Use the base only for its intended CMM-arm application.
  2. Confirm adequate contact area and balance during operation.
  3. Keep the magnetic face clean and free from dents.
  4. For long storage, apply grease or oil to the magnetic faces to prevent rust.
  5. Test the holding capacity at least once a year and replace worn parts when required.
Operating Instructions

Operation Sequence

Follow these steps to mount, energize and release the CMM magnetic base safely.

Mounting & Energizing

  1. Connect the CMM arm to the round upper plate.
  2. Align and balance the magnetic base on the workpiece.
  3. Turn the lever clockwise through 180° to the ON position.

De-energizing

  1. Support the CMM arm before releasing the base.
  2. After operation, turn the lever anticlockwise through 180° to the OFF position.
  3. Lift the base carefully from the workpiece.

Safety Related Norms

The magnetic base is pull-tested on a Universal Testing Machine. Holding capacity is verified by the laboratory and a test certificate is supplied with the product.

Available Sizes

Standard model, nominal dimensions, rated holding force and approximate self-weight.

Code Nominal Size (L × W × H) Holding Force Self-Weight (Approx.)
010-03-01 160 × 115 × 135 mm 500 kg 20 kg
WhatsApp
Call Us