image

Electromagnetic Chuck Heavy Duty Multi Coil Transverse poles

Magnetic Chucks for Grinding & Milling Operations

Electromagnetic Chuck (Heavy Duty Multi Coil Transverse Poles)

Application

This electromagnetic chuck is designed for grinding operations and generates strong magnetic force to hold the workpiece rigidly.

It operates on continuous D.C. power. With no internal wear or deformation caused by moving internal parts, it provides a longer life than a conventional permanent magnetic chuck.

Pole Configuration & Accuracy

Heavy-duty multi-coil construction uses transverse poles with a 40 mm pole pitch. Accuracy is maintained as per IS 8710-1978.

Construction of Electromagnetic Chuck

  • Fabricated overall body made from high-permeability steel.
  • Pole separation using brass strips.
  • Enamelled copper-wire conductor.
  • Class-H insulation with an FRP winding former.
  • Epoxy-potting bonding and continuous D.C. operation.
  • Operation through an operating pendant.

Characteristics of Control Panel

  • Input power supply: 230 V A.C.
  • Output operating voltage: 110 V D.C.
  • A.C. and D.C. supplies protected by fuses and MCB.
  • Indicators for main supply, Magnet ON and demagnetizing cycle.

Inspection & Accessories

Inspection tests:
1) Resistance-to-earth terminal test
2) Demagnetizing test
3) High-voltage test
4) Leak-proof test
5) Slipping-force test as per IS 8710-1978

D.C. Power Supply UnitMag/Demag UnitOperating Pendant

Reliable Electromagnetic Chuck Operation

The electromagnetic chuck is designed for grinding operations and operates on a continuous D.C. power supply. The control panel requires a 230 V A.C. input supply and provides a 110 V D.C. operating output to the chuck.

Control Requirement

A D.C. power-supply unit or Mag/Demag unit is required to operate the electromagnetic chuck.

Inspection & Safety Checks

  1. Ensure the control panel receives the specified 230 V A.C. input supply.
  2. Verify that the electromagnetic chuck receives the specified 110 V D.C. operating supply.
  3. Ensure the prescribed A.C. supply, D.C. supply and MCB safety arrangement is provided.
  4. Check the earth terminal as part of the electrical inspection.
  5. Perform the required de-magnetizing test to verify proper demagnetizing operation.
  6. Carry out the specified high-voltage test during inspection.
  7. Perform the required leak-proof test and verify the chuck's electrical condition.
  8. Verify the required sleeping-force test as per IS 8710-1978.

Operation Sequence (Follow the steps)

01

Connect the chuck to the D.C. power-supply or Mag/Demag control unit.

02

Clean the chuck surface and ferrous workpiece contact face.

03

Position the workpiece correctly on the 40 mm transverse-pole surface.

04

Switch Magnet ON using the operating pendant.

05

Confirm rigid magnetic holding before starting the grinding operation.

06

Perform grinding while maintaining continuous D.C. supply.

07

Stop the machine and initiate the demagnetizing cycle after grinding.

08

Remove the workpiece only after demagnetization is complete.

Available Sizes

Available models are specified by overall size, pole gap and pole pitch. Dimensions are shown as Length × Width × Height.

Model Code Size (L × W × H) Pole Gap Pole Pitch
002-02-01 450 × 150 × 100 mm 15 mm 40 mm
002-02-02 500 × 200 × 100 mm 15 mm 40 mm
002-02-03 600 × 200 × 100 mm 15 mm 40 mm
002-02-04 600 × 250 × 100 mm 15 mm 40 mm
002-02-05 750 × 250 × 100 mm 15 mm 40 mm
002-02-06 900 × 250 × 100 mm 15 mm 40 mm
002-02-07 600 × 300 × 100 mm 15 mm 40 mm
002-02-08 750 × 300 × 100 mm 15 mm 40 mm
002-02-09 900 × 300 × 110 mm 15 mm 40 mm
002-02-10 1000 × 250 × 110 mm 15 mm 40 mm
002-02-11 1000 × 300 × 110 mm 15 mm 40 mm
002-02-12 1500 × 250 × 110 mm 15 mm 40 mm
002-02-13 1500 × 300 × 110 mm 15 mm 40 mm
002-02-14 1500 × 400 × 110 mm 15 mm 40 mm

Applications

Mag Demag unit with pendant for heavy-duty electromagnetic chuck
Mag/Demag Unit with Pendant

A D.C. power-supply unit or Mag/Demag unit is required for operating the electromagnetic chuck.

Need help choosing a model?

Share your load details with our team.

WhatsApp
Call Us