image

Tunnel Type Demagnetizer With Roller Conveyor System

Efficient. Automated. Reliable.

Tunnel Type Demagnetizer With Roller Conveyor System

Application

An automated demagnetizing system designed to eliminate residual magnetism from workpieces generated during machining and manufacturing operations.

Operation

The Tunnel Type Demagnetizer with Roller Conveyor System provides continuous and efficient demagnetization by passing workpieces through a magnetic tunnel from start to end. The system is operated through a programmable logic control (PLC) panel and can be customized in size and configuration according to production requirements.

Key Features

  • Designed to eliminate residual magnetism generated during manufacturing processes.
  • Suitable for workpieces affected by turning, milling, grinding operations and contact with magnets.
  • Provides continuous demagnetization as workpieces pass through the tunnel on the roller conveyor.
  • Helps increase tool life, productivity and overall quality of manufactured components.

How It Operates

  • Provide a suitable electrical supply to the demagnetizer.
  • The system is operated through a Programmable Logic Control (PLC) panel.
  • Place the workpiece on the roller conveyor at the designated entry point.
  • The workpiece passes through the tunnel from start to end for demagnetization.
  • The demagnetized workpiece is then removed from the conveyor for the next manufacturing or handling stage.

Performance Check

Residual magnetism should be checked before and after demagnetizing using a Residual Field Meter (Gauss Meter) to verify the effectiveness of the demagnetization process.

Before Demagnetizing Gauss Meter Demagnetizing After Demagnetizing
Performance & Operation

Effective Residual Magnetism Removal

The Tunnel Type Demagnetizer with Roller Conveyor System is designed to eliminate residual magnetism from workpieces generated during manufacturing processes such as turning, milling, grinding and contact with magnets.

PLC automatic
operation

Residual magnetism should be checked using a Residual Field Meter (Gauss Meter) before and after demagnetizing to verify the effectiveness of the process.

Operating Procedure

  1. Provide a suitable electrical supply to the demagnetizer.
  2. Operate the system through the Programmable Logic Control (PLC) panel.
  3. Check the residual magnetism of the workpiece using a Residual Field Meter (Gauss Meter) before demagnetizing.
  4. Place the workpiece on the roller conveyor and pass it through the tunnel from start to end.
  5. Check the residual magnetism again using the Gauss Meter after demagnetizing.
  6. Confirm that the required reduction in residual magnetism has been achieved.

Operation Sequence (Follow the steps)

01

Provide a suitable electrical supply to the Tunnel Type Demagnetizer.

02

Check the residual magnetism of the workpiece using a Residual Field Meter (Gauss Meter) before demagnetizing.

03

Operate the demagnetizer through the Programmable Logic Control (PLC) panel.

04

Place the workpiece on the roller conveyor and pass it through the demagnetizer tunnel from start to end.

05

The workpiece passes through the tunnel where residual magnetism generated during manufacturing is removed.

06

Check the residual magnetism again with the Residual Field Meter (Gauss Meter) after demagnetizing.

Available Sizes

Overall dimensions are shown as Length × Width × Height. Sizes can be manufactured as per application requirements.

Model Code No. Overall Size (L × W × H)
023-08-01 4000 × 2000 × 2000 mm
023-08-02 1500 × 450 × 1500 mm

Effective Demagnetizing Solutions

Roller conveyor demagnetizing system in a production department
Production Department
Roller conveyor demagnetizer for a packing department
Packing Department
Roller conveyor demagnetizer for tool room and standard room applications
Tool Room & Standard Room

Sizes can be manufactured according to application requirements.

Need help choosing a model?

Share your roller conveyor and workpiece details with our team.

WhatsApp
Call Us