image

Electro Permanent Magnetic Chuck - Hexagonal Pole

Hexagonal-Pole Magnetic Workholding

Electro Permanent Magnetic Chuck

Application

This Electro Permanent Magnetic Chuck is designed for VMC and CNC machines, especially for milling operations.

It overcomes the drawbacks of conventional workholding by eliminating mechanical clamping, enabling quick workpiece release and allowing five-face machining to save time and increase productivity.

Characteristics

External power is required only to energize or de-energize the chuck. No power is required during machining, while rigid magnetic force supports the required depth of cut with accuracy.

Characteristics

  • Designed for VMC and CNC machines, especially for milling operations.
  • Requires an external power supply only for energizing and de-energizing; machining power is not required.
  • Provides rigid magnetic force corresponding to maximum depth of cut with accuracy.
  • Eliminates conventional mechanical clamping, allowing easy and quick release of the workpiece.
  • Five faces of the workpiece can be machined, helping save machining time and improve productivity.
  • Pole gap, pole pitch, pole width and pole style can be selected according to the workpiece requirements.

Construction

  • Overall body fabricated from high-permeability steel.
  • Pole separation provided using epoxy resin.
  • Copper wire conductor with H-class insulation.
  • FRP winding former with epoxy potting.
  • Magnetic system consists of two permanent magnets with different characteristics.
  • Operated through an operating pendant.

Inspection & Accessories

The chuck is checked through electrical and magnetic inspection tests. A suitable switching unit is required to operate it.

Earth Terminal Test Demagnetizing Test Pulling Force Test Operating Pendant Thyristor Control Impulse Unit Capacitor Discharge Unit
EPM Milling Workholding

Rigid holding without continuous power

External power is needed only while switching the chuck ON or OFF. Once energized, the permanent-magnet system maintains rigid holding force without continuous electrical power during machining.

Ensure the workpiece is correctly positioned and securely held by the magnetic chuck before starting machining. Select the pole gap, pole pitch, pole width and pole style according to the workpiece requirements.

Operating Guidelines

  1. Use the EPM chuck for the intended VMC and CNC machining applications.
  2. Confirm that the workpiece is properly positioned on the magnetic chuck surface before energizing.
  3. Verify that the magnetic holding force is adequate for the machining operation and workpiece.
  4. Ensure the external power supply and chuck connections are properly connected before energizing or de-energizing.
  5. Keep the magnetic chuck surface clean and free from chips, contamination and other material that could affect proper workpiece contact.
  6. Select the appropriate pole gap, pole pitch, pole width and pole style according to the workpiece requirements.
  7. Carry out the recommended inspection tests, including earth-terminal resistance, de-magnetization and pulling-force tests.
  8. De-energize the chuck before attempting to remove the machined workpiece.

Operation Sequence (Follow the steps)

01

Connect the chuck to the Thyristor Control Impulse Unit or Capacitor Discharge Unit and operating pendant.

02

Clean the chuck face and the workpiece contact surface.

03

Position the workpiece correctly across the hexagonal magnetic poles.

04

Use the operating pendant to energize the chuck.

05

Confirm rigid magnetic holding before starting the milling operation.

06

Machine the exposed faces; five-face machining can reduce repeated setups.

07

Stop the machine and use the pendant to de-energize and demagnetize the chuck.

08

Remove the released workpiece and prepare the chuck for the next job.

Available Sizes

Available EPM chuck dimensions are specified as Length × Width × Height, with a 15 mm pole gap.

Model Code Size (L × W × H) Pole Gap
003-02-01 470 × 250 × 65 mm 15 mm
003-02-02 650 × 350 × 65 mm 15 mm
003-02-03 1000 × 900 × 80 mm 15 mm
Applications

Precision Machining & Workholding

Pulling-force test for an electro permanent magnetic chuck
Magnetic Holding Force Testing
EPM chuck control unit and operating pendant
EPM Chuck Control & Power Supply
Hexagonal electro permanent magnetic chuck used for VMC and CNC milling
VMC / CNC Milling Application
Need help choosing a model?

Share your workpiece and machining details with our team.

WhatsApp
Call Us