image

Permanent Magnetic Lifter

Safe. Powerful. Power-Free.

Permanent Magnetic Lifter

A compact and efficient lifting solution for handling ferrous materials where a conventional crane hook or similar engagement arrangement is not available.

Permanent Magnetic Lifters simplify material movement, reduce labour and handling time, and improve productivity. Their powerful permanent magnetic circuit holds the job securely and is controlled by a simple manual ON/OFF lever—no external electrical power is required.

NdFeB MagnetsHigh lifting force with lower self-weight
3:1 Safety FactorTested at three times rated capacity
No Power NeededSimple manual lever operation
Low MaintenanceReplaceable spares are available

Best suited for: flat and round ferrous jobs with a clean, sound contact surface. Round jobs should be assessed at approximately 40% of the rated flat-load lifting force.

Product Information

Built for reliable industrial lifting

Every detail below is based on the product operating and safety information provided in the Magtech Associates brochure.

Key Characteristics

  • Powerful NdFeB-grade magnets reduce lifter self-weight while increasing lifting capacity.
  • A simple lever energizes and de-energizes the magnetic circuit.
  • No external electrical power or battery is required.
  • A 3:1 test-load safety factor supports reliable operation where practical air gaps may occur.

How It Operates

  • Use the lifter only for suitable ferrous material.
  • In the OFF position, the handle rests on the stopper and the magnetic circuit remains within the lifter body.
  • Rotate the handle clockwise through 180° to the ON position, concentrating magnetic force through the poles into the job.
  • To release the load, rotate the handle anticlockwise back to OFF to deactivate the external magnetic field.

Spares & Service

Essential spares are available to help keep the lifter operational and avoid unnecessary scrapping of the complete unit.

Magnetic assemblyHandleSafety lockStoppersHook
Safety Related Norms

Tested for dependable lifting

Lifters are load-tested on a Universal Testing Machine (UTM). After testing, they are certified by the laboratory and a certificate is provided. A lifter rated for 100 kg is tested to withstand at least 300 kg, reflecting the stated three-times safety factor.

3×rated capacity
test load

Actual magnetic holding force is affected by surface unevenness, scale, coatings, markings and other conditions that create an air gap between the magnetic face and the load.

Essential Precautions

  1. Use the lifter only for the application for which it is designed.
  2. Never lift beyond the recommended lifting capacity.
  3. Confirm the contact area and balance before lifting.
  4. Do not attempt to lift very hot jobs.
  5. Keep magnetic faces clean, smooth and free from dents.
  6. For long periods of non-use, apply grease or oil to magnetic faces to prevent rust.
  7. Load-test the lifter at least once a year to verify capacity and the condition of its spares.
Operation Sequence
01

Attach

Hang the lifter securely from the crane hook.

02

Align

Place it on the lifting object and confirm correct alignment and balance.

03

Energize

Turn and lock the lever in the ON position.

04

Test Lift

Raise approximately 6 inches and confirm that the job is held properly.

05

Transfer

Move the load at minimum practical height—approximately 1 foot above ground.

06

Place & Release

Set the job down securely, then move the lever to OFF.

Available Sizes

Nominal dimensions are shown as Length × Width × Height. Self-weights are approximate.

Code No. Nominal Size (L×W×H) Lifting Capacity Self Weight (Approx.)
010-01-08 130 × 120 × 100 mm 100 kg 8 kg
010-01-18 215 × 110 × 135 mm 200 kg 15 kg
010-01-01 160 × 115 × 135 mm 300 kg 20 kg
010-01-22 240 × 115 × 135 mm 400 kg 28 kg
010-01-11 220 × 135 × 135 mm 500 kg 30 kg
010-01-03 255 × 135 × 135 mm 600 kg 32 kg
010-01-05 305 × 140 × 180 mm 1000 kg 55 kg
010-01-06 450 × 160 × 180 mm 1500 kg 85 kg
010-01-23 520 × 160 × 180 mm 2000 kg 120 kg
Applications

Versatile material handling

Round bar handling application placeholder
Round Bar Handling
Square tube handling application placeholder
Square Tube Handling
Medium-size plate handling application placeholder
Medium-Size Plate Handling
Large-size plate handling application placeholder
Large-Size Plate Handling
I-beam handling application placeholder
I-Beam Handling
Laminate core lifting application placeholder
Laminate Core Lifting
Machined job lifting application placeholder
Machined Job Lifting
Vertical and horizontal heavy job application placeholder
UTM Machine for Lifter Testing
Hollow job lifting application placeholder
Hollow Job Lifting
Small heavy-job handling application placeholder
Small Heavy-Job Handling
Medium size plate handling application placeholder
Medium Size Plates
Large size plate handling application placeholder
Large Size Plates

*Large or long loads may require a purpose-designed multi-lifterVertical & Horizontal Heavy Jobs arrangement. Capacity and configuration must be confirmed for the actual job.

Need help choosing a model?

Share your load details with our team.

WhatsApp
Call Us