Industrial manufacturing facility

Drawer Type Magnetic Separator (In-Line Operation)

In-Line Magnetic Separation

Drawer Type Magnetic Separator (In-Line Operation)

Purpose

Used for separating ferrous particles from granular and powder raw materials. The vessel is larger than the connected pipe diameter to maintain the material flow rate.

Location & Construction

Installed where raw material passes through the process line. The SS304 or mild-steel vessel contains magnetic rods with NdFeB-grade or strontium ferrite magnets and SS304 or SS316 non-magnetic outer tubes.

Purpose & Location

  • Separates ferrous particles from granular and powder material.
  • Installed in-line where raw material passes.
  • Larger vessel size helps maintain flow through the connected pipe.

Construction

  • SS304 or mild-steel vessel body.
  • NdFeB-grade or strontium ferrite magnets.
  • SS304 or SS316 non-magnetic rod outer tubes.

Maintenance

  • Magnetic grills require periodic cleaning.
  • The operator decides cleaning frequency from actual conditions.
In-Line Operation & Care

Maintain Material Flow and Separation

The drawer assembly captures ferrous particles while the larger vessel allows granular or powder material to continue through the process line.

In-Linematerial-flow
installation

Isolate material flow before opening the door or removing magnetic rods for cleaning.

Operating Guidelines

  1. Install the separator in the raw-material line.
  2. Confirm flange and pipe connections are secure.
  3. Allow material to pass through the magnetic rod levels.
  4. Isolate the flow before opening the vessel.
  5. Clean magnetic rods periodically and refit them securely.

Operation Sequence (Follow the steps)

01

Install the vessel in the material line.

02

Feed granular or powder material through the inlet.

03

Pass material across the magnetic rods.

04

Retain ferrous contamination on the rods.

05

Stop flow and open the access door.

06

Clean and reinstall the magnetic rod assembly.

Available Sizes

Drawer separator model listed in the brochure.

Model Code No.Size
018-05-01L250 × W250 × H350 mm
WhatsApp
Call Us