image

Electromagnetic Chuck – Longitudinal Pole

Magnetic Chucks for Grinding & Milling Operations

Electromagnetic Chuck (Heavy Duty Multi Coil Fine Pitch Longitudinal Poles)

Application

This electromagnetic chuck is designed for grinding operations and generates strong magnetic force to hold the workpiece rigidly.

It operates on continuous D.C. power. With no internal wear or deformation caused by moving internal parts, it provides a longer life than a conventional permanent magnetic chuck.

Longitudinal-Pole Configuration & Accuracy

The heavy-duty multi-coil face uses fine-pitch, close longitudinal poles with a 1 mm pole gap and 2 mm pole pitch. Accuracy is maintained as per IS 8710-1978.

Construction of Electromagnetic Chuck

  • Fabricated overall body made from high-permeability steel.
  • Pole separation using brass strips.
  • Enamelled copper-wire conductor.
  • Class-H insulation with an FRP winding former.
  • Epoxy-potting bonding and continuous D.C. operation.
  • Operation through an operating pendant.

Characteristics of Control Panel

  • Input power supply: 230 V A.C.
  • Output operating voltage: 110 V D.C.
  • A.C. and D.C. supplies protected by fuses and MCB.
  • Indicators for main supply, Magnet ON and demagnetizing cycle.

Inspection & Accessories

Inspection tests:
1) Resistance-to-earth terminal test
2) Demagnetizing test
3) High-voltage test
4) Leak-proof test
5) Slipping-force test as per IS 8710-1978

D.C. Power Supply UnitMag/Demag UnitOperating Pendant

Tested for reliable magnetic holding

Electromagnetic Chucks are designed to provide strong magnetic force for securely holding workpieces during grinding operations. Each chuck is subjected to inspection tests covering electrical safety, demagnetisation, insulation and magnetic holding performance.

Control Requirement

A D.C. power-supply unit or Mag/Demag unit is required to operate the electromagnetic chuck.

Inspection & Safety Checks

  1. Carry out the Earth Terminal Resistance Test to verify electrical grounding safety.
  2. Perform the De-magnetising Test to confirm proper demagnetisation operation.
  3. Conduct the High Voltage Test to verify electrical insulation integrity.
  4. Perform the Leak Proof Test as part of the chuck inspection procedure.
  5. Carry out the Sleeping Force Test for magnetic holding performance as per IS 8710-1978.
  6. Operate the chuck using the specified D.C. power supply and Magnet ON / Demag control cycle.
  7. Use the chuck for its intended grinding and milling operations and ensure the workpiece is securely held before machining.

Operation Sequence (Follow the steps)

01

Connect the chuck to the D.C. power-supply or Mag/Demag control unit.

02

Clean the chuck surface and ferrous workpiece contact face.

03

Position the workpiece correctly across the close longitudinal poles.

04

Switch Magnet ON using the operating pendant.

05

Confirm rigid magnetic holding before starting the grinding operation.

06

Perform grinding while maintaining continuous D.C. supply.

07

Stop the machine and initiate the demagnetizing cycle after grinding.

08

Remove the workpiece only after demagnetization is complete.

Available Sizes

Available models are specified by overall Length × Width × Height, Pole Gap and Pole Pitch.

Model Code Size (L × W × H) Pole Gap Pole Pitch
002-04-01 450 × 150 × 100 mm 1 mm 2 mm
002-04-02 500 × 200 × 100 mm 1 mm 2 mm
002-04-03 600 × 200 × 100 mm 1 mm 2 mm
002-04-04 600 × 250 × 100 mm 1 mm 2 mm
002-04-05 750 × 250 × 100 mm 1 mm 2 mm
002-04-06 900 × 250 × 100 mm 1 mm 2 mm
002-04-07 600 × 300 × 100 mm 1 mm 2 mm
002-04-08 750 × 300 × 100 mm 1 mm 2 mm
002-04-09 900 × 300 × 110 mm 1 mm 2 mm
002-04-10 1000 × 250 × 110 mm 1 mm 2 mm
002-04-11 1000 × 300 × 110 mm 1 mm 2 mm
002-04-12 1500 × 250 × 110 mm 1 mm 2 mm
002-04-13 1500 × 300 × 110 mm 1 mm 2 mm
002-04-14 1500 × 400 × 110 mm 1 mm 2 mm

Applications

Mag Demag unit with pendant for longitudinal-pole electromagnetic chuck
Mag/Demag Unit with Pendant

A D.C. power-supply unit or Mag/Demag unit is required for operating the electromagnetic chuck.

Need help choosing a model?

Share your load details with our team.

WhatsApp
Call Us