image

Hopper Magnet (Flat Ring)

Magnetic Separation Equipment

Hopper Magnet (Flat Ring)

Application

An efficient magnetic separation solution designed to remove ferrous particles from raw materials in granular, powder and liquid form.

Construction

Hopper Magnets use multiple magnetic cartridges arranged in a flat-ring configuration to capture unwanted ferrous contaminants from the material flow. The cartridges contain permanent magnets and are designed for reliable separation, improved product quality and continuous industrial use.

Key Characteristics

  • Designed for separating ferrous particles from raw materials in granular, powder and liquid form.
  • Multiple magnetic cartridges are arranged in a flat-ring frame for effective magnetic separation.
  • Cartridges use permanent magnets and are available in NdFeB-grade or Strontium Ferrite magnets.
  • Outer tubes are manufactured from SS304/SS316 grade non-magnetic stainless steel.

How It Works

  • Raw material passes through the hopper magnet and comes into contact with the magnetic cartridges.
  • Ferrous particles are attracted and held by the permanent magnetic rods.
  • The magnetic cartridges separate unwanted ferrous contamination from the product flow.
  • Cartridges are cleaned periodically to remove collected ferrous particles and maintain effective separation.

Maintenance & Benefits

The magnetic cartridges require periodic cleaning for effective results. Cleaning frequency depends on the operating conditions and is determined by the operator.

Periodic Cleaning NdFeB Magnets Strontium Ferrite SS304 / SS316
Maintenance & Operating Care

Reliable Magnetic Separation

Hopper Magnet (Flat Ring) cartridges require periodic cleaning to maintain effective ferrous particle separation. The required cleaning frequency depends on the operating conditions and the amount of ferrous contamination collected during operation.

NdFeB or strontium
ferrite magnets

Regularly inspect and clean the magnetic cartridges to remove accumulated ferrous particles and maintain effective magnetic separation performance.

Maintenance Guidelines

  1. Clean the magnetic cartridges periodically to maintain effective separation.
  2. Determine the cleaning frequency according to the operating conditions and material flow.
  3. Remove accumulated ferrous particles from the magnetic cartridges during cleaning.
  4. Inspect the magnetic cartridges regularly for cleanliness and proper condition.
  5. Ensure the magnetic separator remains suitable for the material and application in which it is installed.
  6. Maintain the magnetic cartridges in clean condition for consistent separation results.
  7. Follow the operator's established cleaning schedule based on actual operating requirements.

Operation Sequence (Follow the steps)

01

Introduce the granular, powder or liquid raw material into the hopper for magnetic separation.

02

Allow the material to pass through the area containing the magnetic cartridges.

03

Permanent magnetic rods attract and retain unwanted ferrous particles present in the material flow.

04

Separated material continues through the hopper while ferrous contamination remains captured by the magnetic cartridges.

05

Periodically clean the magnetic cartridges to remove accumulated ferrous particles and maintain effective separation.

06

Set the cleaning frequency according to operating conditions and continue operation for consistent material quality.

Available Sizes

Available Hopper Magnet flat-ring models and their approximate sizes.

Model Code No. Approximate Size
018-02-01 Dia. 150 × H 50 mm
018-02-02 Dia. 200 × H 50 mm
018-02-03 Dia. 250 × H 50 mm
018-02-04 Dia. 300 × H 50 mm

Applications

Flat-ring hopper magnet for industrial material separation
Ferrous Particle Separation

Used in food, plastic, chemical and automobile industries for granular, powder and liquid materials.

Need help choosing a hopper magnet?

Share your hopper and material details with our team.

WhatsApp
Call Us