Industrial manufacturing facility

Vessel Type Magnetic Separator for Coolant Oil (In-Line Operation)

In-Line Coolant Oil Filtration

Vessel Type Magnetic Separator for Coolant Oil (In-Line Operation)

Purpose

Used for separating ferrous particles from coolant oil. The vessel is installed in-line and is larger than the pipe diameter to maintain the oil flow rate.

Location & Construction

Installed where impure oil passes from the machine for filtration before pure oil is returned. The SS304 or mild-steel vessel contains NdFeB-grade or strontium ferrite magnetic cartridges with SS304 or SS316 outer tubes.

Purpose & Location

  • Separates ferrous particles from coolant oil.
  • Installed in-line between the machine and filtration return.
  • Larger vessel diameter helps maintain flow.

Construction

  • SS304 or mild-steel vessel body.
  • NdFeB-grade or strontium ferrite magnets.
  • SS304 or SS316 non-magnetic cartridge outer tubes.

Maintenance

  • Magnetic cartridges require periodic cleaning.
  • Cleaning frequency is decided by the operator.
Coolant Filtration & Care

Return Cleaner Oil to the Machine

Impure coolant enters the vessel, passes the magnetic cartridges and exits after ferrous contamination is retained on the magnetic surfaces.

In-Linecoolant-oil
filtration

Stop and isolate coolant flow before opening the cover or cleaning the magnetic cartridges.

Operating Guidelines

  1. Connect inlet, outlet and flanges securely.
  2. Confirm the vessel stands securely.
  3. Pass impure coolant through the magnetic cartridge zone.
  4. Isolate coolant flow before opening the cover.
  5. Clean cartridges periodically and reinstall them correctly.

Operation Sequence (Follow the steps)

01

Connect the vessel in the coolant line.

02

Feed impure coolant through the inlet.

03

Pass oil around the magnetic cartridges.

04

Retain ferrous particles on the cartridges.

05

Isolate flow and clean the cartridges.

06

Return filtered oil to the machine.

Available Sizes

Vessel separator models listed in the brochure.

Model CodeSize
018-06-01Dia. 200 × Length 700 mm
018-06-02Dia. 200 × Length 400 mm

Applications

Vessel type in-line coolant oil separator
In-Line Coolant Oil Filtration

Used in chemical and automobile industries.

Need help choosing a model?

Share your material and process details with our team.