image

Electromagnetic Chuck For Grinding Operation

Magnetic Chucks for Grinding & Milling Operations

Electromagnetic Chuck (Single Coil Transverse Pole)

Application

Electromagnetic chucks are designed for grinding operations and generate strong magnetic force to hold the workpiece rigidly.

They operate on a continuous D.C. power supply. With no internal wear or deformation caused by movement of internal parts, they provide a longer life than conventional permanent magnetic chucks.

Accuracy

Chuck accuracy is maintained as per IS 8710-1978.

Construction of Electromagnetic Chuck

  • Fabricated overall body made from high-permeability steel.
  • Pole separation using brass strips.
  • Enamelled copper-wire conductor.
  • Class-H insulation with an FRP winding former.
  • Epoxy-potting bonding and continuous D.C. operation.
  • Operation through an operating pendant.

Characteristics of Control Panel

  • Input power supply: 230 V A.C.
  • Output operating voltage: 110 V D.C.
  • A.C. and D.C. supplies protected by fuses and MCB.
  • Indicators for main supply, Magnet ON and demagnetizing cycle.

Inspection & Accessories

Inspection tests:
1) Resistance-to-earth terminal test
2) Demagnetizing test
3) High-voltage test
4) Leak-proof test
5) Slipping-force test as per IS 8710-1978

D.C. Power Supply UnitMag/Demag UnitOperating Pendant

Reliable Workholding for Grinding

The electromagnetic chuck is designed to provide strong magnetic force and rigidly hold the workpiece during grinding operations. It operates on a continuous D.C. power supply and should be used with the specified electrical control arrangement.

Control Requirement

A D.C. power-supply unit or Mag/Demag unit is required to operate the electromagnetic chuck.

Operating Guidelines

  1. Use the electromagnetic chuck only for suitable grinding applications and compatible ferrous workpieces.
  2. Ensure the workpiece is correctly positioned and properly supported on the magnetic chuck surface.
  3. Confirm that the magnetic chuck is connected to the specified continuous D.C. power supply before operation.
  4. Ensure the magnetic holding force is established before starting the grinding operation.
  5. Keep the magnetic surface clean and free from chips, dirt and other material that may affect proper workpiece contact.
  6. Operate the chuck using the appropriate Mag/Demag control arrangement.
  7. De-energize and demagnetize the chuck using the control system before removing the finished workpiece.

Operation Sequence (Follow the steps)

01

Connect the chuck to the D.C. power-supply or Mag/Demag control unit.

02

Clean the chuck surface and the ferrous workpiece contact face.

03

Place and position the workpiece correctly on the transverse-pole surface.

04

Switch Magnet ON using the operating pendant.

05

Confirm rigid magnetic holding before starting the grinding operation.

06

Perform the grinding operation while maintaining continuous D.C. supply.

07

After grinding, stop the machine and initiate the demagnetizing cycle.

08

Remove the workpiece only after demagnetization is complete.

Available Sizes

The electromagnetic chucks are available in different sizes with a 15 mm pole gap and 40 mm pole pitch.

Model Code Size (L × W × H) Pole Gap Pole Pitch
002-01-01 450 × 150 × 100 mm 15 mm 40 mm
002-01-02 500 × 200 × 100 mm 15 mm 40 mm
002-01-03 600 × 200 × 100 mm 15 mm 40 mm
002-01-04 600 × 250 × 100 mm 15 mm 40 mm
002-01-05 750 × 250 × 100 mm 15 mm 40 mm
002-01-06 900 × 250 × 100 mm 15 mm 40 mm
002-01-07 600 × 300 × 100 mm 15 mm 40 mm
002-01-08 750 × 300 × 100 mm 15 mm 40 mm
002-01-09 900 × 300 × 100 mm 15 mm 40 mm
002-01-10 1000 × 250 × 110 mm 15 mm 40 mm
002-01-11 1000 × 300 × 110 mm 15 mm 40 mm
002-01-12 1500 × 250 × 110 mm 15 mm 40 mm
002-01-13 1500 × 300 × 110 mm 15 mm 40 mm
002-01-14 1500 × 400 × 110 mm 15 mm 40 mm

Applications

Mag Demag unit with operating pendant for electromagnetic chuck
Grinding Operations

A D.C. power-supply unit or Mag/Demag unit is required for operating the electromagnetic chuck.

Need help choosing a model?

Share your load details with our team.

WhatsApp
Call Us