image

Electro Permanent Magnetic Lifter

Material Handling Magnets

Electro Permanent Magnetic Lifter (EPM)

Application

The EPM lifter provides easy material handling where engaging a crane hook or similar arrangement is not possible, reducing laborious and time-consuming work.

It increases efficiency and productivity when handling suitable ferrous materials.

Characteristics

External power is required only to energize or de-energize the lifter (ON/OFF). A continuous power supply is not required during the lifting operation.

Safety Factors

  1. A three-times factor of safety is provided: a lifter recommended for 100 kg is tested for 300 kg.
  2. The 1:3 recommended-load-to-test-load ratio supports optimal working conditions even with substantial operating air gaps.
  3. Unevenness, scale, coatings, punched characters or numbers can create a gap between the magnetic face and lifting object.
  4. For round jobs, consider 40% lifting force because contact with the magnetic face is along a line.

Operating Characteristics

  1. External power is used only for ON and OFF switching.
  2. Continuous power is not required while carrying the energized load.
  3. Use RESET followed by Magnet ON to energize the lifter.
  4. Use RESET followed by Magnet OFF to de-energize and release the load.

Scope of Supply & Accessories

Scope of supply:
A) EPM Lifter
B) Control Panel (Rectifier unit)
C) Operating Pendant

M.S. Fabricated TackleSlings & Chains'D' Shackles & Links Flexible CableCable CarriersCable DrumWire Rope & Clamps Control-panel Electrical SparesCapacitor Discharge Unit Required for Operation

Safety Related NORMS

Lifters are load-tested on a Universal Testing Machine (UTM), certified by the laboratory and supplied with the certificate. With the three-times factor of safety, a lifter recommended for 100 kg must lift at least 300 kg during testing.

Performance of Lifter

Consider 40% lifting force for a round job because of line contact. Full rated capacity requires close contact between the magnetic face and lifting object.

Precautions

  1. Use the Electro Permanent Magnetic Lifter only for the application and type of ferrous material for which it is designed.
  2. Never exceed the recommended lifting capacity of the lifter.
  3. Ensure that the magnetic face has proper contact with the lifting object and confirm that the load is correctly positioned and balanced.
  4. Do not attempt to lift very hot jobs or materials outside the specified operating conditions.
  5. Keep the magnetic face clean, smooth and free from dents, rust, scale and other contaminants that may create an air gap.
  6. When the lifter is not in use for a long period, protect the magnetic face with suitable grease or oil to prevent rusting.
  7. Load-test the lifter at least once a year to verify its lifting capacity and the service life of its components and spares.
  8. Inspect the control panel, fabricated tackle, chains, slings and other spares at least once a year.

Operation Sequence (Follow the steps)

01

Install the control panel on the crane or at a nearby location.

02

Provide an external A.C. supply to the control panel.

03

Connect the control panel to the EPM Lifter and operating pendant.

04

Hang the lifter with an M.S. fabricated tackle, if used.

05

Hang the complete assembly from the crane hook.

06

Align the lifter properly on the lifting object and verify its position.

07

Press RESET and then Magnet ON on the operating pendant to energize the lifter.

08

Lift approximately 6 inches and confirm that the load is held correctly.

09

Carry the load to the desired place at a minimum height, approximately one foot above ground.

10

Place the load properly, then press RESET followed by Magnet OFF to de-energize the lifter.

Available Sizes

Nominal dimensions are shown as Length × Width × Height. Self-weights are approximate.

Model Code Nominal Size (L×W×H) Lifting Capacity Self Weight (Approx.)
013-01-01 L 350 × W 100 × H 110 mm 300 kg 30 kg
013-01-02 L 405 × W 230 × H 80 mm 600 kg 60 kg
013-01-03 L 465 × W 175 × H 220 mm 1000 kg 150 kg

Applications

Electro Permanent Magnetic Lifter handling heavy billets
Heavy Billets Handling
EPM lifter positioned on a heavy billet
Heavy Billets Handling
Heavy billet handling with an EPM lifter
Heavy Billets Handling
EPM lifter raising a heavy billet
Heavy Billets Handling

A capacitor discharge unit is required for operating this lifter.

Need help choosing a model?

Share your load details with our team.

WhatsApp
Call Us